Housing/Frame: in die-cast aluminium with cooling fins. Structure (2/3 LED modules): in die-cast aluminium with bracket for spotlight mounting. It also allows pointing the individual module at an angle of +/- 20° to its horizontal axis. Optics: made of V0 polycarbonate, metallized high yield. Diffuser: extra-clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts. Coating: polyester resin for powder coating, resistant to corrosion and saline environments. Then the fixture is coated with an acrylic based UV-stabilised resin. Wiring: 220-240V 50/60Hz power supply; with external IP66 driver applied to the fixture for the version with 1 or 2 LED modules. Standard Supply: complete with galvanised and coated bracket. Single LED module version, equipped with IP66 airtight connector for mains connection. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547. It works in two modes: - differential mode: surge between power cables and between the phase and neutral. - common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole. Upon request: DIMM 1-10V (dimmable from 20% to 100%) or DALI. Acetic acid salt spray coating pursuant to standard UNI EN ISO 9227 “Corrosion Tests in Artificial Atmosphere”. LED: Power factor: ≥0,92. LED 4000K - 36300lm - CRI 70 - 235W - 700mA - Surge Protector 4/6kV LED 4000K - 51000lm - CRI 70 - 363W - 1050mA - Surge Protector 4/6kV LED 4000K - 56650lm - CRI 70 - 420W - 1200mA - Surge Protector 6/6kV
Luminous flux maintenance 70% - 120.000h - (L70B20) - 700mA version 70% - 100.000h - (L70B20) -1050mA version 70% - 70.000h - (L70B20) - 1200mA version 80% - 100.000h - (L80B10) - 700mA version 80% - 80.000h - (L80B10) - 1050mA version 80% - 50.000h - (L80B10) - 1200mA version |
