3295 Sella 1 - FL - CONTINENTAL LIGHTING

Pole connection: in die-cast aluminium and with gaskets to secure the frame according to different inclinations. Adjustable ranges: between 0° and 20° for side mount; and between 0° and 20° for mast-top mounting. Inclination pace: 5°. Suited for poles with a diameter 46-76.

Diffuser: extra-clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts (UNI-EN12150-1: 2001).

Coating: polyester resin based and UV-stabilised powder paint , resistant to corrosion and saline environments.

Standard supply: double insulation switch that cuts off electricity when the cover is opened. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547.

It works in two modes:

- differential mode: surge between power cables and between the phase and neutral.

- common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.

Upon request: for Class II fixtures, protection up to 10KV. Acetic acid salt spray coating pursuant to standard UNI EN ISO 9227 “Corrosion Tests in Artificial Atmosphere”.

LED: Power factor: =0.92
70% maintenance of luminous flux at 80,000 hrs (L70B20).
LED 31W - 4300lm - CRI 70 - 700mA - 4000K -30°+40° - surge protector 6/8kV
LED 63W - 8640lm - CRI 70 - 700mA - 4000K -30°+40° - surge protector 6/8kV
LED 94W - 12960lm - CRI 70 - 700mA - 4000K -30°+40° - surge protector 6/8kV

Available upon request:
- 1-10V dimmer: 10%-100% dimming with 1-10V device, to be ordered with subcode -12.
- Virtual midnight: stand-alone device with automatic flux reduction, to be ordered with subcode -30.
- Power line carrier: point-to-point diagnosis and control management system, to be ordered with subcode -0078.
- Wi-Fi remote control (to be agreed upon): point-to-point control and diagnosis system of the entire system with Wi-Fi technology.
Wind surface: 1750cm².