Housing: in die-cast aluminium with cooling fins integrated into the cover. Diffuser: Injection moulded, in V2 self-extinguishing, UV stabilized, clear polycarbonate, ideal for the food industry. Standard supply: device for automatic temperature control. In the event of an unexpected temperature rise caused by particular weather conditions, the system will reduce the luminous flux to lower the working temperature and guarantee proper operation. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547. It works in two modes: - differential mode: surge between power cables and between the phase and neutral. - common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole. Upon request: for Class II fixtures, protection up to 10KV. Equipment: complete with watertight IP68 connecter for line connection. Anti-condensation valve for air recirculation. Heat sink: the heat dissipation system is specially designed and made to allow the operation of the LED lights with temperatures below 50° (Tj = 85°), thus guaranteeing excellent performance/efficiency and durability. The possibility to choose the correct drive current for LEDs. Using a lower current will improve the efficiency of fixtures and therefore increase energy saving. Optics: polycarbonate with micro-faceted finish. LEDs with lens combined with flux recovery system. LED: Latest generation LED technology, Ta-40 + 40°C life 80.000h to 90% L90B10 Photobiological safety class: exempt group EN62471. LED 4000K - 700mA - 12960lm - 94W - CRI 80 - surge protector 6/8Kv LED 4000K - 700mA - 17280lm - 125W - CRI 80 - surge protector 6/8Kv LED 4000K - 700mA - 25920lm - 187W - CRI 80 - surge protector 6/8Kv Emergency version: 1h, acc. 1175 to be purchased separately Upon request: - with power supply DIG dimmable with subcode 0041. - emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050). |
